Return to the BUILD
“With this issue’s parts you an add more of the rail to your railroad base.”
This issue will feel very familiar as we have done all of this before…
Contents
Parts
Materials: The Rail is metal and the chairs are plastic.
Magazine
- Drive Time: Model Instructions
- The Godfather of Time – Part IV: Bob Gale
- A Time Traveler’s Guide: Marty McFly Jr.
Build
Continuing the Rail
Step 1
Retrieve your Track assembly. Position the Rail onto the base as shown, making sure the Rail and the end of the base are aligned:
Steps 2-3
Position the four Rail Chairs on either side of the Rail and secure them down with eight (8) EP screws:
Thoughts
With this issue now complete, we are 75% done with the Track assembly. Only a few more to go!
Next Up
Issue 150 – Wheels: Railroad Wheel/Center/Nut/Washer (Rear)