Return to the BUILD
“… begin constructing a case of plutonium to accompany your DeLorean.”
With the car now complete, the final four issues of the standard subscription contain this plutonium case and the wind-up clock from the end of the first film. This plutonium case is so iconic that I actually have a full-sized one that I use to safely transport my DeLorean.
- Drive Time: Model Instructions
- Jimmy Kimmel Live!
- A Time Traveler’s Guide: Suited Up
Plutonium Case Lid
Position the Handle on top of the Plutonium Case Lid, as shown:
Fit the Handle Plate over the Handle, aligning the holes as shown:
Secure the Handle Plate down with four (4) MP screws:
Fit the two Lid Catches to the front of the Plutonium Case Lid, and secure them with four (4) MP screws, two on each side:
Make sure the small lips of these two Lid Catches are facing down and outwards, as shown:
I am looking forward to completing this little plutonium case. It will make a nice addition to my DeLorean display. The lid itself is plastic, but the handle components are metal.
Running Total of screws used so far: 1136
Issue 128 – Display: Plutonium Case Body, Catches, Handle Covers, Handles